Welcome
Installation
5 Getting Started
1
2
3
4
Press the "MENU" button to enter main menu.
Press "UP"or " DOWN " button to highlight "Installation",
press "RIGHT" button to enter the Installation menu.
Press "UP" or "DOWN" cursor button to highlight the desired
item and press "OK"button to enter the sub-menu .
Press "EXIT" button to exit.
1
2
Select the "Auto Scan", press "OK" button to enter the Auto
Scan menu.
Press the cursor button to set "FTA Only" and T2 Signal Only,
then highlight "Search", press the "OK" button to start auto
scan .
If you use the Set-top box for the first time, the "Welcome"
menu appears.
Press cursor button to setup the Region, Language, Display
Mode and Aspect Mode.
Highlight "OK" and press the "OK" button to start Auto Scan
channel.
Welcome
OK
Region
Language
Display Mode
Aspect Mode
France
English
720p@50HZ
4:3LB(Letter box)
Installation
Auto Scan
Channel Scan
LCN
Auto Scan
Auto Scan
FTA Only
T2 Signal Only
Search
No
No
Channel Scan
Scan Mode
Scan Band
Channel No.
Frequency
Bandwidth
Network Search
Signal Strength
Signal Quality
By Channel
UHF
CH21(474000KHz)
474000KHz
8MHz
No
0%
0%
1
2
Channel Scan
Select "Channel Scan", press the "OK" button to enter the
Channel Scan menu.
Press cursor button to set Scan mode, Scan Band ,Channel
No., Frequency and Bandwidth, then highlight "Search",
press "OK" button to start channel scan .
LCN
You can activate/disactivate the LCN( Logical Channel Number)
function by setting the "LCN " to on/off.
If LCN is activated, you can't change the original number of TV
channels by scanning .
14
