16
EN
•
Follow the on-screen instructions to
configure and confirm the internal Wi-Fi
settings of DS9800WS.
»
After a while, the
WI-FI STATUS
indicator on the back of DS9800WS
stops blinking and turns solid green,
and the unit beeps.
»
DS9800WS is connected to your
existing home Wi-Fi network
successfully.
Note
•
If the
WI-FI STATUS
indicator on DS9800WS does not
stay green steadily, it means that the Wi-Fi connection
has failed. Please power off both your Wi-Fi router and
DS9800WS and then power on them again to see
whether DS9800WS can be connected to your home
Wi-Fi network. If the problem remains, try the above
procedures again.
•
After you finish the above configuration or power-off
and power-on of DS9800WS, the new Wi-Fi network
created by DS9800WS will disappear.
Tip
•
If you like, you can change the name of your
DS9800WS in
Philips Fidelio Device Name
on the
DS9800WS configuration web page. This is helpful
when you have multiple Philips AirPlay-enabled devices
in your house and you need to distinguish between
them.
Restore your Wi-Fi enabled device
back to your existing home Wi-Fi
setting
Note
•
Make sure that the settings at steps 2 to 3 below match
your home Wi-Fi network settings you wrote on paper.
1
Select
Settings -> Wi-Fi
on your iPod
touch/iPhone/iPad.
•
Or open the list of available Wi-Fi
networks on your PC/Mac.
Содержание DS9800WS
Страница 2: ......
