13
English
EN
Switch DS9800WS to Assisted Wi-Fi
Setup mode
•
After successful boot-up (see 'Turn
DS9800WS on' on page 9), press and hold
WI-FI SETUP
on the back of the main
speaker.
»
The
WI-FI STATUS
indicator blinks
green and yellow alternately.
»
A new Wi-Fi network of DS9800WS
itself is created, with the network name
(SSID) of
Philips_Install XXXXXX
.
»
It takes about 45 seconds for successful
creation of this new Wi-Fi network.
Note
•
After you finish manual Wi-Fi setting for DS9800WS,
this new Wi-Fi network disappears.
•
If you fail to enter Assisted Wi-Fi Setup mode, power
off DS9800WS and power on it, then try again after
successful boot-up.
•
Make sure that there are no other Philips AirPlay-
enabled devices in Assisted Wi-Fi Setup mode at the
same time. Multiple new Wi-Fi networks created this
way may interfere with each other.
Connect your Wi-Fi enabled device to
the newly created Wi-Fi network
The new Wi-Fi network created by
DS9800WS only allows access of one Wi-
Fi enabled device. To avoid interference
from any other Wi-Fi devices, you are
recommended to temporarily disable the
Wi-Fi function on your other Wi-Fi devices.
Option 1: Use your iPod touch/iPhone/iPad
1
Select
Settings
->
Wi-Fi
on your iPod
touch/iPhone/iPad.
Содержание DS9800WS
Страница 2: ......
