26
EN
8 Troubleshooting
Warning
&
Never remove the casing of this apparatus.
$ $
the system yourself.
If you encounter problems when using this
!
# $% , !
$ ` ! ?%
philips.com/welcome). When you contact
` !
and the model number and serial number are
available.
No power
<
X +L
device is connected properly.
<
X +L
outlet.
No sound
<
+" $%
<
Check the network connection. Set up the
network again if needed (see 'Connect to
~} +`
page 12).
<
Check if you have selected the correct
audio source.
No response from the unit
<
Press and hold on DS6800W for more
than 5 seconds to reset the device. Then
set up the Wi-Fi network for DS6800W
again (see 'Connect to your home Wi-Fi
+`
=Q%
<
+L
$ %
Remote control does not work
<
< !
select the correct source with the remote
control instead of the main unit.
<
Reduce the distance between the remote
control and the unit.
<
Insert the battery with its polarities (+/–
signs) aligned as indicated.
<
Replace the battery.
<
+ ,[
sensor on the front of the main speaker.
Wi-Fi network connection failed
<
Check if your Wi-Fi router is Wi-Fi
HA%==!G % $
! ~} HA%==!G
routers.
<
If your Wi-Fi router is Wi-Fi 802.11n
!
802.11b/g mode. DS6800W does not
support connection to routers with
802.11n only.
<
This device does not support the WPS-
PIN method.
<
If your Wi-Fi router supports WPS and
the WPS-PBC method but fails to connect
>HAA~ ~}
method (see 'Scenario 2: Connect to a
non-WPS router' on page 13).
<
Enable SSID broadcast on the Wi-Fi router.
<
Keep away from potential sources of
~}
such as microwave ovens.
<
If you fail to use your PC for Wi-Fi network
`L
Wi-Fi network. You cannot use Ethernet
+` %
<
Make sure that the SSID name of your
home router consists of alphanumeric
characters like %/#/* inserted.
<
, +` $
'
Philips_Fidelio XXXX
' in the setting
symbols.
<
~}
network name (SSID) may be created
automatically when you use WPS for
% +
network name (SSID) to a simple one that
also change the Wi-Fi security mode to
secure your network.
