10
EN
Store radio stations
automatically
If no radio stations are stored, the unit can store
radio stations automatically.
1
Turn on the unit.
2
Press
SRC
to select TUNER source.
»
[AUTO INSTALL -- PRESS PLAY --
STOP CANCEL] (press
to start
automatic installation, or press to
cancel) is displayed.
3
Press
.
»
The unit automatically stores radio
stations with sufficient signal strength.
»
After all available radio stations are
stored, the first stored radio station is
broadcast automatically.
Turn on
•
Press .
»
The unit switches to the last selected
source.
Switch to standby
•
Press again to switch the unit to standby
mode.
»
The clock (if set) appears on the
display panel.
Switch to ECO Power mode:
•
Press and hold for more than three
seconds.
»
[ECOPOWER]
(Eco Power) is
displayed briefly.
Tip
•
The unit switches to Eco Power mode after 15 minutes
in standby mode if no Apple device is docked to the
unit.
•
Press and hold cannot switch the unit to Eco standby
mode if there is Apple device docked to the unit.
•
Press and hold to switch the unit to standby mode
only if the unit is in working mode.
Switch between standby mode and Eco Power
mode:
•
In standby/Eco Power mode, press and
hold to switch the unit to Eco Power/
standby mode.
Demonstrate the unit's
features
•
In standby mode, press
/MENU
.
[WELCOME TO PHILIPS]
(welcome to
Philips) scrolls from the right to the left on
the display, and then
[DEMO ON]
(demo
on) is displayed briefly.
»
This system's features are displayed
one by one.
•
To turn off the demonstration,
press /
MENU
again.
Note
•
You can also press on the main unit to turn on/ turn
off the demonstration.
Содержание DCM3175
Страница 2: ......
