14
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1
In the tuner mode, press and hold
SET
TIME
/
PROG
for more than 2 seconds to
activate automatic program mode.
»
[AUTO] (auto) is displayed.
»
The unit automatically stores radio
stations with sufficient signal strength..
»
The first programmed radio station is
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1
Tune to a radio station.
2
Press
SET TIME
/
PROG
to activate the
program mode.
3
Press / to select a number.
4
Press
SET TIME
/
PROG
to confirm.
5
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store
another station in its place.
•
To select FM stereo or FM mono, press
OK
.
Select a preset radio station
1
Press / to select a preset number.
5 Listen to radio
Note
•
Only FM radio reception is available on this
unit.
Tune to a radio station
Tip
•
Position the antenna as far as possible from
TV, VCR or other radiation source.
Note
•
For optimal reception, fully extend and adjust
the position of the antenna.
1
Press
TUNER
to select FM tuner.
2
Press and hold / for more than 2
seconds.
»
[SRCH] (search) is displayed.
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
•
To tune to a weak station, press
/
repeatedly until you find optimal
reception.
Tip
•
[STEREO]
is default setting for tuner mode.
•
Under tuner mode, you can press
OK
repeatedly to toggle between
[STEREO]
and
[MONO]
, and the unit memorizes your setting
even if you turn off the unit or turn to other
sources.
EN
DC390_12_UM_Book 1_V5.0.indb 14
12/3/2013 3:11:51 PM
