13
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Tip
•
For certain iPod models, it may take up to a
minute before the charging indication appears.
•
If clock is not manually set, when iPod/iPhone/
iPad is connected, the clock radio synchronizes
time from the iPod/iPhone/iPad automatically.
Play from an external device
You can also listen to an external audio device
through this unit.
1
Press
MP3 LINK
to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
•
the
MP3 LINK
jack (3.5mm) on the
back of the unit.
•
the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
•
To pause/resume play, press
OK
/
.
•
To skip to a track, press / .
•
To search during play, press and
hold / , then release to resume
normal play.
•
To go back to the previous iPod/
iPhone menu, press
MENU
.
•
To scroll through the menu, press
/ .
• To confirm a selection, press
OK
/
.
»
If no key is pressed for more than
10 seconds,
OK
/
acts back as
the play/pause key.
Install the rubber pad
If necessary, install the supplied rubber pad to
keep the iPad/iPad 2 stable before you place
the iPad/iPad 2.
English
EN
DC390_12_UM_Book 1_V5.0.indb 13
12/3/2013 3:11:51 PM
