10
EN
Notes on speaker connection
Never connect speaker wires to the metal
body or chassis of the car.
Never connect speaker wires with stripes
to one another.
Note on the power supply lead (yellow)
When you connect other devices to this
system, ensure that the rating of the car
circuit is higher than the total fuse value of
all the connected devices.
Notes on rear camera connection
Check your local driving regulations on
whether it is legally required to install
a rear view camera. These connections
require a professional mechanic to install.
You can connect a rear view camera to
this car audio video system, so as to view
the things that happens behind your car
through the screen on the system. This
helps protecting your bumper and anything
it might contact, especially you are driving
a big vehicle.
Mount in the dashboard
Note
Check wire connections before you mount the unit
into a car.
If preset radio stations are lost when the ignition key
is turned OFF and then back ON, reconnect the red
leads crosswise to the yellow ones.
1
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lost its memory.
If the car battery is not disconnected,
to avoid short-circuit, ensure that bare
wires do not touch each other.
2
Ensure that the horizontal slant of the car
dashboard opening is between 0 and 20
degrees. The unit cannot be used if the
dashboard opening's slant angle is above
20 degrees.
3
Fix the four plastic buckles (supplied by
the car manufacturer for the original audio
system) to the unit.
4
Fix the mounting brackets to the unit with
screws (supplied by the car manufacturer).
CID3711_00_UM_V3.1.indb 10
2011/12/13 16:05:12
