Philips CID3292, Руководство пользователя

Страница: 28 / 30

29
Video connection is improper. Check the
‡
connections.
Noise in broadcasts.
Signals are too weak. Select other stations
‡
with stronger signals.
Check the connection of the car antenna.
‡
Change broadcast from stereo to mono.
‡
Preset stations lost.
Battery cable is not correctly connected.
‡
Connect the battery cable to the terminal
that is always live.
Fuse is broken
The Fuse type is incorrect. Replace it with
‡
a 15A fuse.
Speaker wire or power wire is grounded.
‡
Check the connections.
Display show ERR-12
USB data error. Check the USB device.
‡
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
The device cannot be used with the system
‡
to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
The Bluetooth reception is poor. Move
‡
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
7KHGHYLFHGRHVQRWVXSSRUWWKHSURÀOHV ‡
required for the system.
The Bluetooth function of the device is
‡
not enabled. Refer to the user manual of
the device for how to enable the function.
The system is not in the pairing mode.
‡
The system is already connected with
‡
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
12 Troubleshooting
Warning
Never remove the casing of this apparatus.
‡
7RNHHSWKHZDUUDQW\YDOLGQHYHUWU\WRUHSDLU
the system yourself.
If you encounter problems when using
WKLVDSSDUDWXVFKHFNWKHIROORZLQJSRLQWV
before requesting service. If the problem
UHPDLQVXQVROYHGJRWRWKH3KLOLSVZHEVLWH
(www.philips.com/welcome). When you contact
3KLOLSVHQVXUHWKDWWKHDSSDUDWXVLVQHDUE\
and the model number and serial number are
available.
No power
Car engine has not been started. Start
‡
the car engine.
Connections is incorrect.
‡
Fuse has been damaged. Replace fuse.
‡
No sound
Volume is too low. Adjust volume.
‡
Speaker connections is incorrect.
‡
Disc does not play
Disc is upside down. Ensure the printed
‡
side is upwards.
Disc is dirty. Clean the disc with a
‡
FOHDQVRIWOLQWIUHHFORWK:LSHWKHGLVF
outwards from the center.
Disc is defective. Try another disc.
‡
incompatible disc is used. Try another disc.
‡
Disc rating exceeds the restrict setting.
‡
Change the rating settings to lower one.
Disc region code is not compatible with
‡
the unit. Use disc with proper region code.
No image
Parking brake wire connection is incorrect.
‡
Check the parking wiring.
,PDJHÁDVKHVRUGLVWRUWHG
Video DVD settings do not match with
‡
the DVD. Adjust video DVD settings.
English
EN