10
Connection: for cars with ISO
connectors
Caution
Ensure that all loose leads are insulated with
•
electrical tape.
1
Pull out the ISO connectors from car
dashboard and connect them to the
bigger end of the supplied standard
connector.
2
Connect the other end of the supplied
standard connector to the unit.
3
Connect the antenna and amplifier as
illustrated, if applicable. You can connect
the car audio to the amplifier through
RCA-TO-RCA cables (not supplied).
Note on the power supply lead (yellow)
When you connect other devices to this
•
apparatus, ensure that the rating of the
car circuit is higher than the total fuse
value of all the connected devices.
Notes on speaker connection
Never connect speaker wires to the
•
metal body or chassis of the car.
Never connect speaker wires with stripes
•
to one another.
Overview of parts
These are the supplied parts needed to
connect and install this unit.
a
In-car audio system
b
Sleeve
c
Front panel
d
Trim plate
e
Rubber cushion
f
Disassembly tools
g
Screws (4 pieces)
h
ISO connector
a
b
c
e
f
g
h
d
EN
CEM200_98_UM_V1.0_EN.indd 10
11/11/2009 5:02:07 PM