Philips CarStudio CE132, Руководство пользователя

Страница: 10 / 30

8
EN
ISO male
connectors
Connect to
i Yellow strip To the +12V car
battery which is
energized at all times
2
Connect the antenna and amplifier as
illustrated, if applicable.
Sockets on rear
panel
External sockets or
connectors
1 For ISO male
connectors
As indicated above
2 REAR L Rear left speaker
3
REAR R
Rear right speaker
4 ANTENNA Antenna
Tip
•
The pin arrangement for the ISO connectors depends
on the type of your vehicle. To avoid damage to the
unit, connect properly.
REAR
L
R
a b c d
Mount into the dashboard
• If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
• If the car battery is not disconnected, to
avoid short-circuit, make sure that the bare
wires do not touch each other.
1
Make sure that the car dashboard opening
is within these measurements:
2
Remove the mounting sleeve with the
supplied disassembly tools.
183 mm
53mm
5mm