>
The projector is equipped with the following functions to optimize its use and handling:
Settings
•
Press Menu and select
Settings
in the menu bar.The following settings/adjustments can now
be made
for Computer, Component and Video/S-video input, following the instructions
under ‘General explanation’:
– Language
selects the required menu language;
– Keystone
correction
corrects picture distortion of the horizontal and vertical keystone type by internal scaling;
– SmartDimmer
reduces the luminosity of the lamp to eighty percent
(if enabled)
;
– Source
selects the current projection source: Auto, RGB sync,YPbPr, RGB sog, S-Video,Video,
Mutimedia, Wireless
(only available on cClear wireless version),
DVI-RGP, DVI-YPbPr.
– System information
The System Information sub menu contains an overview of the most relevant projector
settings, including information on the hardware and software configuration;
– Factory settings
resets all user settings to the default factory settings;
– Key lock
de-activates all remote and local controls.To disable the keylock function keep the OK
button pressed for 10 seconds.
– Start-up screen
displays (Default) or suppresses (Off) the default Philips start-up screen upon the
projector’s start up and to select (Custom) and store (Load) a start-up screen of your
own choice.
– Lamp counter
shows the operating time of the lamp, which can be reset after a new lamp has been
installed;
– SmartSave
selects the delay time for the projector to switch to Standby;
– Auto Source
switches automatic source selection on or off;
– Feedback
suppresses OSD messages. Warning or error messages however are never suppressed;
Audio adjustments
•
Press Menu and select Audio in the menu bar. The following Audio adjustments can now be
made for both Computer, Component and Video/S-video input,
following the instructions
under ‘General explanation’:
– Volume
adjusts the sound level;
– Bass
adjusts the bass tones;
– Treble
adjusts the high tones;
– Mute
mutes the sound of the projector
;
– Audio out
switches between fixed (‘Line’) or variable (‘Regulated’) volume output on the Audio Out
socket of the projector.
Volume can also be adjusted with the – keys on the remote control and local keyboard.
General
adjustments/settings
Note
5. Operation
Philips Multimedia Projector
33
English
User guide
cClear
On Screen Display Menu
Menu
OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu
OK
AV
Mute
Source
Stand
by
Lamp
Temp
LASER
LASER
VOolume
VOolume
OK
OK
Menu
Menu
Standby
Standby
On
On
AV Mute
AV Mute
Select
Select
Mode
Mode
Source
Source
Mouse
Mouse
RIGHT
RIGHT
LEFT
LEFT
RIight
RIight
Left
Left
6
Window
Window
XP cClear10 English (good) 24-07-2003 15:52 Pagina 33
