9
2. Setting up the SMART All-In-One
2.3 Detach the hinge for VESA
Before you start detaching the hinge,
please follow the instructions below to
avoid any possible damage or injury.
1. Place the SMART All-in-One face
down on a smooth surface. Pay
attention not to scratch or damage
the screen.
2. Use your fingers to squeeze the
hinge cover gently till the hook slip
out of the slot.
3. Use a screwdriver to loosen 4
screws.
4. Remove the stand from the SMART
All-in-One body.
Note
This SMART All-in-One accepts a 75mm
x 75mm VESA-Compliant mounting
interface.
75mm
75mm
