2
1. Important
blocked or covered. Do not place
the SMART All-in-One on a bed,
sofa, rug, or similar surface. Do not
place the SMART All-in-One near or
over a radiator or heat register. Do
not place the SMART All-in-One in
a bookcase or cabinet unless proper
ventilation is provided.
• The SMART All-in-One should
be operated only from the type
of power source indicated on the
label. If you are not sure of the type
of power supplied to your home,
consult your dealer or local power
company.
• The SMART All-in-One is equipped
with a three-pronged grounded
plug, a plug with a third (grounding)
pin. This plug will fit only into a
grounded power outlet as a safety
feature. If your outlet does not
accommodate the three-wire plug,
have an electrician install the correct
outlet, or use an adapter to ground
the appliance safely. Do not defeat
the safety purpose of the grounded
plug.
• Unplug the unit during a lightening
storm or when it will not be used for
long period of time. This will protect
the SMART All-in-One from damage
due to power surges.
• Do not overload power strips and
extension cords. Overloading can
result in fire or electric shock.
• Never push any object into the slot
on the SMART All-in-One cabinet.
It could short circuit parts causing
a fire or electric shock. Never spill
liquids on the SMART All-in-One.
• Do not attempt to service the
SMART All-in-One by yourself;
opening or removing covers can
expose you to dangerous voltages
and other hazards. Please refer
all servicing to qualified service
personnel.
• To ensure satisfactory operation,
use the SMART All-in-One only with
UL listed computers which have
appropriate configured receptacles
marked between 100 - 240V AC,
Min. 5A.
• The wall socket shall be installed
near the equipment and shall be
easily accessible.
• For use only with the attached
power adapter (Output 20V DC)
which have UL, CSA listed licensed
(only for SMART All-In-One with
power adapter).
Model
: ADPC2065
Manufacturer
: TPV ELECTRONICS
(FUJIAN) CO., LTD.
1.2 Cleaning
• Clean the cabinet regularly with
cloth. You can use soft-detergent
to wipe out the stain, instead
of strong-detergent which will
cauterize the product cabinet.
• When cleaning, make sure no
detergent is leaked into the product.
The cleaning cloth should not be
too rough as it will scratch the
screen surface.
• Please disconnect the power cord
before cleaning the product.
1.3 Special notes on SMART All-
in-One
The following symptoms are normal
with SMART All-in-One and do not
indicate a problem.
