background image

7

1. Important

Important information for Burn-in/Ghost 
image

‡

Always activate a moving screen saver 
program when you leave your monitor 
unattended. Always activate a periodic 
screen refresh application if your monitor 
will display unchanging static content. 
Uninterrupted display of still or static 
images over an extended period may cause 
“burn in”, also known as “after-imaging” or 
“ghost imaging”, on your screen.

‡

“Burn-in”, “after-imaging”, or “ghost imaging” 
is a well-known phenomenon in LCD panel 
technology. In most cases, the “burned in” 
or “after-imaging” or “ghost imaging” will 
disappear gradually over a period of time 
after the power has been switched off.

 

Warning

Failure to activate a screen saver, or a periodic 
screen refresh application may result in severe 
“burn-in” or “after-image” or “ghost image” 
symptoms that will not disappear and cannot be 
repaired. The damage mentioned above is not 
covered under your warranty.

Service

‡

The casing cover should be opened only by 
qualified service personnel.

‡

If there is any need for any document for 
repair or integration, please contact with 
your local service center. (please refer to 
the chapter of “Consumer Information 
Center”) 

‡

For transportation information, please refer 
to “Technical Specifications”. 

‡

Do not leave your monitor in a car/trunk 
under direct sun light.

 

Note

Consult a service technician if the monitor 
does not operate normally, or you are not sure 
what procedure to take when the operating 
instructions given in this manual have been 
followed.

1.4 Notational Descriptions

The following subsections describe notational 
conventions used in this document. 

Notes, Cautions and Warnings 

Throughout this guide, blocks of text may be 
accompanied by an icon and printed in bold or 
italic type. These blocks contain notes, cautions 
or warnings. They are used as follows:

 

Note

This icon indicates important information and 
tips that help you make better use of your 
computer system.

 

Caution

This icon indicates information that tells you 
how to avoid either potential damage to 
hardware or loss of data.

 

Warning

This icon indicates the potential for bodily harm 
and tells you how to avoid the problem.
Some warnings may appear in alternate formats 
and may not be accompanied by an icon. In such 

FDVHVWKHVSHFLÀFSUHVHQWDWLRQRIWKHZDUQLQJLV

mandated by the relevant regulatory authority.
Do not modify this equipment without 
authorization of the manufacturer. 
The monitor shall not be used for critical 
diagnosis purpose or for life supporting system.

 

WARNING

TO AVOID RISK OF ELECTRIC SHOCK, THIS 
EQUIPMENT MUST ONLY BE CONNECTED 
TO A SUPPLY MAINS WITH PROTECTIVE 
EARTH.

Содержание Brilliance C240P4




















































Отзывы: