20
3. Image Optimization
available. All other SmartControl Premium tabs
are not available.
•
Display the Source instruction pane and
current input source setting.
•
On single input displays, this pane will not
be visible.
Options>Theft Deterrence
- Theft Deterrence
Pane will only be active when selecting Theft
Deterrence Mode from the drop-down Plug-in
menu.
To enable Theft Deterrence, clicking Enable
Theft Deterrence Mode button brings up the
following screen:
•
User can enter PIN between 4 and 9 digits
numbers only.
•
After entering PIN, Accept button takes
user to the pop-up dialog box on the
following page.
•
Minimum minutes set to 5. Slider set to 5
by default.
•
Does not require the display be attached
to a different host to go into Theft
Deterrence mode.
After creating PIN, the Theft Deterrence pane
will indicate Theft Deterrence Enabled and
provide PIN Options button:
•
Theft Deterrence Enabled is displayed.
•
Disable Theft Deterrence Mode opens
pane screen on next page.
•
PIN Options button only available after
user creates PIN, button opens secure PIN
web site.
Help menu
Help>User Manual
- Will only be active when
selecting User Manual from the drop-down
Help menu. On a non-supported display
capable of DDC/CI, only the Help and Options
tabs are available.
Help>Version
- Will only be active when
selecting Version from the drop- down Help
menu. On a non-supported display capable of
