background image

1

1. Important

1.  Important

This electronic user’s guide is intended for 

anyone who uses the Philips Display. Take time 

to read this user manual before you use your 

Display. It contains important information and 

notes regarding operating your Display.
The Philips guarantee applies provided the 

product is handled properly for its intended use, 

in accordance with its operating instructions and 

upon presentation of the original invoice or cash 

receipt, indicating the date of purchase, dealer’s 

name and model and production number of the 

product.

1.1  Safety precautions and 

maintenance

 Warnings

Use of controls, adjustments or procedures 

other than those specified in this documentation 

may result in exposure to shock, electrical 

hazards and/or mechanical hazards.
Read and follow these instructions when 

connecting and using your computer Display.

Operation

•  Please Keep the Display out of direct 

sunlight, very strong bright lights and away 

from any other heat source. Lengthy 

exposure to this type of environment may 

result in discoloration and damage to the 

Display.

•  Remove any object that could fall into 

ventilation holes or prevent proper cooling 

of the Display’s electronics.

•  Do not block the ventilation holes on the 

cabinet.

•  When positioning the Display, make sure 

the power plug and outlet are easily 

accessible.

•  If turning off the Display by detaching the 

power cable or DC power cord, wait for 6 

seconds before attaching the power cable 

or DC power cord for normal operation.

•  Please use approved power cord provided 

by Philips all the time. If your power cord 

is missing, please contact with your local 

service center. (Please refer to Customer 

Care Consumer Information Center)

•  Do not subject the Display to severe 

vibration or high impact conditions during 

operation.

•  Do not knock or drop the Display during 

operation or transportation.

Maintenance

•  To protect your Display from possible 

damage, do not put excessive pressure on 

the LCD panel. When moving your Display, 

grasp the frame to lift; do not lift the 

Display by placing your hand or fingers on 

the LCD panel.

•  Unplug the Display if you are not going to 

use it for an extensive period of time.

•  Unplug the Display if you need to clean it 

with a slightly damp cloth. The screen may 

be wiped with a dry cloth when the power 

is off. However, never use organic solvent, 

such as, alcohol, or ammonia-based liquids 

to clean your Display.

•  To avoid the risk of shock or permanent 

damage to the set, do not expose the 

Display to dust, rain, water, or excessive 

moisture environment.

•  If your Display gets wet, wipe it with dry 

cloth as soon as possible. 

•  If foreign substance or water gets in 

your Display, please turn the power off 

immediately and disconnect the power 

cord. Then, remove the foreign substance 

or water, and send it to the maintenance 

center.

•  Do not store or use the Display in 

locations exposed to heat, direct sunlight or 

extreme cold.

•  In order to maintain the best performance 

of your Display and use it for a longer 

lifetime, please use the Display in a location 

that falls within the following temperature 

and humidity ranges.

Содержание Brillance BDM4065UC






















































Отзывы: