11
2. Setting up the monitor
B
A
(main)
A
(main)
B
•
Swap
: The main picture source and the sub
picture source swapped on the display.
Swap A and B source in [
PIP
] mode:
B
A
(main)
↔
B
(main)
A
•
Off
: Stop MultiView function.
Note
When you do the SWAP function, the video
and its audio source will swap at the same
time. (Refer to page <7> “Independent audio
playback, regardless of video input” for more
detail.)
2.4 Remove the Base Assembly for
VESA Mounting
Before you start disassembling the Display base,
please follow the instructions below to avoid
any possible damage or injury.
1. Place the Display face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Loosen the assembly screws, then detach
the neck from the Display.
2
1
3. Loosen the 4 screws from the rear cover.
2
1
Note
This Display accepts a 200mm x 200mm
VESA-Compliant mounting interface.
200mm
200mm
