Philips BDP7200/12, Руководство по обслуживанию

Страница: 13 / 83

1-6-1 E5J10DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to “Reference Notes.”
Reference Notes
1. CAUTION 1: Locking Tabs (L-1), (L-2) and (L-3)
are fragile. Be careful not to break them.
2. The FE Main CBA & BD Mechanism Assembly is
adjusted as a unit at factory. Therefore, do not
disassemble it. Replace the FE Main CBA & BD
Mechanism Assembly as a unit.
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] Top Cover D1 10(S-1) ---
[2] Tray Panel D2 *2(L-1) 1
[3]
Front
Assembly
D2
*5(L-2), *3(L-3),
*CN2001
1
[4] Front CBA D2 4(S-2) ---
[5]
Power SW
CBA
D2 (S-3) ---
[6]
FE Main
CBA & BD
Mechanism
Assembly
D3
4(S-4), *CN2601,
*CN6401
2
[7]
BE Main
CBA Unit
D3
(S-5), (S-6), *CN7000,
*CN7001, *CN7401,
*CN7602, Locking
Card Spacers
---
[8]
Power
Supply CBA
D4
3(S-7a), (S-7b), (S-8),
2(S-9), *CN2600,
Power PCB Holder
---
[9] Rear Panel D5
6(S-10), (S-11),
(S-12), *CN2004
---
[10]
Motor DC
Fan
D5 2(S-13), Fan Holder ---
[11] AV CBA D5 5(S-14), (S-15), ---
[12] SD CBA D5
2(S-16), 2(S-17),
SD Card Holder
---
[4] Front CBA
[5] Power SW CBA
[3] Front Assembly
[1] Top Cover
[2] Tray Panel
[8] Power Supply CBA
[7] BE Main CBA Unit
[9] Rear Panel
[10] Motor DC Fan
[13] Front Bracket R
[6] FE Main CBA &
BD Mechanism Assembly
[11] AV CBA [12] SD CBA
[13]
Front
Bracket R
D5 (S-18) ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] Top Cover
(S-1)
(S-1)
(S-1)
Fig. D1