Philips BDP3306/F7 Скачать руководство пользователя страница 18

Страница: 18 / 60

1-7-4

B4(P&F)_(LED_Netflix Model)FW

Network Update

1. Press [

] button to display Setup menu.

2. Select Setup - Advanced Setup - Software Update -

Network.

3. When “Yes” is chosen, the screen appears in Fig. j

and the unit starts connecting to the network.

Fig. j

4. The firmware version confirmation screen (Fig. k)

will appear on the screen. Select “Yes” and press
[OK] button.

Fig. k

5. Firmware downloading starts.

6. Upon completion of downloading, Fig. l will appear

on the screen.
Press [OK] button.

Fig. l

7. The unit starts reading the firmware. Fig. m will

appear on the screen. LED of “POWER ON”
flashes.

Fig. m

8. Updating starts automatically. Fig. n will appear on

the screen.

Fig. n

9. The power turns off automatically.

10. The power turns on again automatically and LED

of “POWER ON” lights.

Note:

The setup setting configured before the update
will be kept.

Network Error Message

Software Update

Network Connecting...

Software Update

Current Version : X.XX.XX

: X.XX.XX

Latest Version

The latest software can be downloaded.
Do you want to download?

Yes

Software Update

Software download has been completed.
Software update will start shortly.

Press [OK].

Software Update

If you want to exit update, press [BACK].
Then all download date will be erased.

Loading Software...

1. Loading

2. Updating

No.

Error Message

The cable is not correctly connected.
Please confirm the connection of the cable.

DHCP cannot be acquired.
Please set whether to confirm the connection
with the manual.

Internet Protocol address is not set.
Please confirm a set content.

The equipment with same Internet Protocol
address already exists.
Please set another Internet Protocol address.

There is no response from Default gateway.
Please confirm the address of Default
gateway.

It is not possible to connect it with the DNS
server.
Please confirm the Internet connection or the
DNS address setting.

It is not possible to connect to the server.
Please contact our support center.

It is not possible to confirm the Firmware
version.
Please contact our support center.

Cannot connect to the wireless network.
Please confirm the wireless network setting.

Software Update

Updating Software...

1. Loading

2. Updating

Please wait for a few minutes.
Do not unplug the AC cord or interrupt updating process.
When update is completed unit will automatically turn off,
and unit will automatically turn back on.

Updating

Success

flash alternately.

remain on.

Содержание BDP3306/F7





























































Результаты поиска

Содержание BDP3306/F7

Отзывы:

Philips BDP3306/F7, Руководство по обслуживанию, Страница: 18 / 60

Результаты поиска

Содержание BDP3306/F7

Отзывы: