2
1. Important
•
If foreign substance or water gets in
your Display, please turn the power
off immediately and disconnect
the power cord. Then, remove the
foreign substance or water, and
send it to the maintenance center.
•
Do not store or use the Display in
locations exposed to heat, direct
sunlight or extreme cold.
•
In order to maintain the best
performance of your Display and use
it for a longer lifetime, please use
the Display in a location that falls
within the following temperature
and humidity ranges.
•
Temperature: 0-40°C 32-104°F
•
Humidity: 20-80% RH
Important information for Burn-in/
Ghost image
•
Always activate a moving screen
saver program when you leave
your Display unattended. Always
activate a periodic screen refresh
application if your Display will
display unchanging static content.
Uninterrupted display of still or
static images over an extended
period may cause “burn in”, also
known as “after-imaging” or “ghost
imaging”, on your screen.
•
“Burn-in”, “after-imaging”, or
“ghost imaging” is a well-known
phenomenon in LCD panel
technology. In most cases, the
“burned in” or “after-imaging” or
“ghost imaging” will disappear
gradually over a period of time after
the power has been switched off.
Warning
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or “after-
image” or “ghost image” symptoms
that will not disappear and cannot be
repaired. The damage mentioned above
is not covered under your warranty.
Service
•
The casing cover should be opened
only by qualified service personnel.
•
If there is any need for any
document for repair or integration,
please contact with your local
service center. (please refer to the
chapter of “Consumer Information
Center”)
•
For transportation information,
please refer to “Technical
Specifications”.
•
Do not leave your Display in a car/
trunk under direct sun light.
Note
Consult a service technician if the
Display does not operate normally, or
you are not sure what procedure to take
when the operating instructions given in
this manual have been followed.
1.2 Notational Descriptions
The following subsections describe
notational conventions used in this
document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text
may be accompanied by an icon and
printed in bold or italic type. These
blocks contain notes, cautions or
warnings. They are used as follows:
Note
This icon indicates important
information and tips that help you make
better use of your computer system.
Caution
This icon indicates information that
tells you how to avoid either potential
damage to hardware or loss of data.