186
186
Command name
Set
Command
Get
Command
Command
Code
Remarks
Audio parameters set
0x42
Volume get
0x45
Volume set
0x44
Volume limits
0xB8
Miscellaneous info
0x0F Operating
hours
Smart power
0xDD
Dimming
backlight
Video alignment
0x70
Serial Code Get
0x15
Tiling Get
0x23
Tiling Set
0x22
2. Compatibility
Test
y
3rd Party HDMI/PC Test: TBD
10.5 Design quality and reliability review and validation procedure
These are activities that should be executed by Supplier and MMD group per product creating process. Supplier
must provide whole quality and reliability testing and evaluation report to DQE. DQE will be responsible for reviewing
the design quality and reliability report with verification and validation.
10.5.1 There are design quality and reliability reviews for each product respectively
The design quality and reliability review is required whenever a new product is starting to be created from supplier in
either electrical or mechanical parts.
During design and evaluation phase, detailed design quality and reliability reviews are required from EVT stage to
DVT and PVT stage respectively.
10.5.2 Quality and Reliability evaluation and testing report
Supplier should provide product quality and reliability evaluation and testing report in each product developing
milestone to DQE for review. This is not limited to three times. Intensive and comprehensive design reviews are
recommended whenever required.
10.5.3 General Review Procedure
1) Review DQE pending items of previous review meetings.
2) Check the current status of all tests and evaluations which should be done and provided by supplier before the
meeting.
3) Discuss the design quality and reliability by means of circuit walk through, assembly and disassembly and
assess the potential risks.
4) List down suggestions /attention points /remaining problems and action plan. (Or countermeasure).
Содержание BDL3215E/00
