CD Player
CD Player
Cassette Recorder
Playing a CD
This CD player plays Audio Discs including
CD-Recordables and CD-Rewritable.
•
MP3 CD-ROMs, CD-I, CDV,VCD, DVD or
computer CDs are not possible for playback
on this set.
Important:
CDs encoded with
copyright
protection technologies
by some record
companies may be unplayable by this product.
1
Adjust the
source selector
to
CD
.
2
Insert a CD/ CD-R(W) with the printed side
facing up and press the CD door gently
close.
➜
Display shows
--
and later, the total
number of tracks. (See
2
,
3
)
3
Press
PLAY/PAUSE
2;
on the set to start
playback.
➜
Display:
2
and the current track number.
(See
4
)
4
To pause playback press
PLAY/PAUSE
2;
.
Press
PLAY/PAUSE
2;
again to resume
play.
5
To stop CD play, press
STOP
9
.
6
To switch off the set, adjust the source
selector to
TAPE/
POWER OFF
position and
check the cassette keys are released.
Helpful hints :
CD play will also stop when:
- you open the CD compartment;
- you select
TUNER
or
TAPE/
POWER OFF
sound source;
- the CD has reached the end of playback.
Selecting a different track
• Press
PREVIOUS, NEXT
∞
or
§
once or
repeatedly until the desired track number
appears in the display.
• In the pause/stop position, press
2;
to start
playback.
Finding a passage within a
track
1
During playback, press and hold down
∞
/
§
.
➜
The CD is played at high speed and low
volume.
2
When you recognize the passage you want
release
∞
/
§
.
➜
Normal playback resumes.
Helpful hints :
When searching within a final
track and you reach the end of the last track,
the CD goes to stop mode.
Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1
In the stop position, press
PROG
to activate
programming.
➜
Display:
PROG
and
00
flash.
2
Press
∞
or
§
to select your desired track
number.
➜
Display:
PROG
and your desired track
number flash. (see
5
)
3
Press
PROG
to store the desired track
number.
➜
Display:
PROG
and
00
flash for you to
program the next track. (see
6
)
4
Repeat steps
2
to
3
to select and store all
desired tracks in this way.
➜
Display shows
--
after 20 tracks are
stored
5
To play your program, press
PLAY/PAUSE
2;
.
➜
Display:
PROG
flashes during program
playback
To review a program
•
In the stop position, press
PROG
repeatedly
to see your stored track numbers.
Erasing a program
You can erase the contents of the memory
by:
– Pressing
STOP
9
(twice during playback or
once in the stop position)
– Selecting
TUNER
or
TAPE/
POWER OFF
sound source;
– opening the CD door;
Cassette playback
1
Adjust the
source selector
to
TAPE/
POWER OFF
.
2
Press
9/
to open the cassette holder and
insert a cassette and close the deck.
3
Press
1
to start playback.
4
To pause playback press
;
.
5
To resume, press
;
again.
6
To stop the tape, press
9/
.
Fast forwarding/rewinding
1
Press
5
or
6
until you reach your desired
passage.
2
Press
9/
to stop rewinding/fast forwarding.
Helpful hints :
- During playback, the keys are automatically
released at the end of a tape and the set is
switched off (unless PAUSE mode
;
has been
activated.)
- During fast forwarding/rewinding, the keys will
not be released at the end of a tape. To switch
off the set, make sure the cassette keys are
also released.
General information on recording
•
Recording is permissible insofar as copyright
or. other rights of third parties are not
infringed.
•
For recording, use only NORMAL type cas-
settes (IEC type I) on which the tabs have
not yet been broken.This deck is not suited
for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes.
•
The best recording level is set automatically.
Altering the
VOLUME
will not affect the
recording.
•
To protect a tape from accidental erasure,
break out the tabs. If you wish to record
again, cover the tabs with a piece of adhesive
tape.
CD synchro start recording
1
Select
CD
source.
2
Insert a CD and if desired, program track
numbers.
3
Press
9/
to open the cassette holder. Insert
a blank tape and close the deck.
4
Press
0
to start recording.
➜
Playing of the CD/ program starts
automatically from the beginning. It is not
necessary to start the CD player sepa-
rately.
5
For brief interruptions, press
;
. To resume
recording, press
;
again.
6
To stop recording, press
9/
.
