Philips AVENT SCD525, Руководство пользователя

Страница: 10 / 272

,
The LINK light lashes red and the message ‘Searching’ appears on the display. (Fig. 15)
,
The LINK light on the parent unit turns green and lights up continuously when a connection
has been established between the baby unit and parent unit. The message ‘Linked’ appears on
the display. (Fig. 16)
,
After 2 seconds the message ‘Linked’ disappears and the temperature value is shown on the
display. (Fig. 17)
,
If no connection is established, the LINK light on the parent unit lashes red. The parent unit
beeps from time to time and the message ‘Searching’ appears on the display, followed by the
message ‘Not Linked’ (Fig. 18).
Positioning the baby monitor
1 Place the baby unit at least 1 metre/3.5 feet away from your baby (Fig. 19).
2 Place the parent unit within the operating range of the baby unit. Make sure it is at least 1
metre/3.5 feet away from the baby unit to avoid acoustic feedback (Fig. 20).
For more information on the operating range, see section ‘Operating range’ below.
Operating range
The operating range of the baby monitor is 330 metres/1000 feet in open air. Depending on the
surroundings and other disturbing factors, this range may be smaller. Indoors the operating range is
up to 50 metres/150 feet.
Note: If the ECO mode is switched on, the operating range of the baby monitor is also smaller. See
section ‘ECO mode’ in chapter ‘Menu options’.
Dry materials Material thickness Loss of range
Wood, plaster, cardboard, glass
(without metal, wires or lead) < 30cm/12in 0-10%
Brick, plywood < 30cm/12in 5-35%
Reinforced concrete < 30cm/12in 30-100%
Metal grilles or bars < 1cm /0.4in 90-100%
Metal or aluminium sheets < 1cm/0.4in 100%
For wet and moist materials, the range loss may be up to 100%.
Features
The following features are described in chapter ‘Menu options’, as they can only be operated in the
menu of the parent unit:
- Adjusting microphone sensitivity
- Sound alert on/off
- Setting room temperature range (minimum and maximum temperature)
- Temperature alert on/off
- ECO mode on/off
- Setting temperature scale (Fahrenheit or Celcius)
adjusting loudspeaker volume
1 Press the or – button on the baby unit until the desired loudspeaker volume for
the baby unit has been reached (Fig. 21).
Note: You can only set the loudspeaker volume on the baby unit when a lullaby is playing.
ENGLISH
10