Philips Avent SCD506, Руководство пользователя

Страница: 10 / 180

What to do if no link is established
- If the parent unit is out of range, place it closer to the baby unit, but not closer than 1 metre/3.5
feet.
- If the baby or parent unit is too close to another DECT appliance (e.g. a cordless phone), switch off
this appliance or move the unit away from this appliance.
- If the baby unit is switched off, switch it on.
Operating range
- The operating range is 330 metres/1000 feet outdoors and up to 50 metres/150 feet indoors.
- The operating range of the baby monitor varies depending on the surroundings and factors that
cause interference. Wet and moist materials cause so much interference that the range loss is up to
100%. For interference from dry materials, see the table below.
Dry materials Material thickness Loss of range
Wood, plaster, cardboard,
glass (without metal, wires
or lead) < 30cm (12in) 0-10%
Brick, plywood < 30cm (12in) 5-35%
Reinforced concrete < 30cm (12in) 30-100%
Metal grilles or bars < 1cm (0.4in) 90-100%
Metal or aluminium sheets < 1cm (0.4in) 100%
Functions and feedback on the baby unit
Nightlight
The nightlight produces a soft glow that comforts your baby.
1 Press the nightlight button on the back of the baby unit to switch on the nightlight (Fig. 14).
2
Press the nightlight button again to switch off the nightlight.
Lullaby function
1
Press the lullaby play/stop button on the baby unit to play the last selected lullaby (Fig. 15).
The selected lullaby repeats for 30 minutes.
2 Press the next lullaby button to select another lullaby from the list (Fig. 16).
3 To adjust the sound level of the lullaby, press the + or – button on the baby unit.
4 To stop lullaby playing, press the lullaby play/stop button on the baby unit.
Paging the parent unit
If you have lost the parent unit, you can use the PAGE button on your baby unit to locate the parent
unit. This function only works when the parent unit is switched on.
1
Press the PAGE button on the baby unit (Fig. 17). The parent unit produces a paging alert tone.
2 To stop the paging alert tone, press the PAGE button on the baby unit again or press any button
on the parent unit. The paging alert tone stops automatically after 2 minutes.
10
English