English
11
How to assemble
Press the electric fan into the fan ring
from the inner side of the mask cover.
Make sure that all 3 snaps on the ring
are fastened.
Attach the battery to the magnet on
the mask cover.
Press the fan holder into the electric
fan.
Match the filter’s 8 shape buckle with
the button on the inner side of the
mask cover. Pull the filter until the
button slips into the smaller side of
the buckle.
How to wear
Before putting the mask on, wash your hands thoroughly with soap and water
for 20 seconds or use hand sanitizer.
Position the mask on
your face with adjustable
nose clip facing up.
Put the face mask on,
pull the ear straps around
both ears, press down
the mask and adjust the
nose clip to fit against the
bridge of the nose.
Adjust the length of
the ear straps to ensure
a tight-fitting seal by
covering the nose and
mouth fully (without air
leakage).
How to remove
It is possible to contaminate your face or surroundings when removing the mask.
To avoid, the recommendation are:
• Wash your hands thoroughly with soap and water for 20 seconds or use hand
sanitizer before removing.
• Only handle the straps, ties or clips.
• Do not give mask to someone else to use.
• Place the mask to be washed in a specific container (clean plastic bag).
• Wash it in line with the instructions (see – cleaning and maintenance).
• Wash your hands thoroughly with soap and water for 20 seconds or use
hand sanitizer once removed.
AMC067-AirMasks_3000.062.5277.2_BOOKLET_120x120mm_BW.indd 11
AMC067-AirMasks_3000.062.5277.2_BOOKLET_120x120mm_BW.indd 11
01-03-21 11:25
01-03-21 11:25