Philips AC4558, Руководство пользователя

Страница: 16 / 222

14 EN
6 Replacing the
air purification
filters
Understanding the
healthy air protect lock
This air purifier is equipped with a
filter replacement indicator to make
sure that the air purification filter is
in optimal condition when the air
purifier is operating. When the filters
need to be replaced, the filter code
displays on the screen and the filter
replacement alert ( ) lights up red.
If the filters are not replaced in time,
the air purifier will stop operating
and automatically lock to protect
the air quality in the room. Replace
the filters as soon as possible
according to the filter code.
Replacing the filters
Note
• The air purification filters are not
washable or reusable.
• Always turn off the air purifier
and unplug from the electrical
outlet before replacing the
filters.
• Do not clean the filters with a
vacuum.
• If the pre-filter is damaged,
worn or broken, do not use.
Visit www.philips.com/support
or contact the Consumer Care
Center in your country.
Filter alert chart ( fig. | )
Filter alert light
status
Action
A5 displays
on the screen
and the filter
replacement
alert goes on.
Replace the
NanoProtect
filter Series 3
(
FY3433 )
C7 displays
on the screen
and the filter
replacement
alert goes on.
Replace the
NanoProtect
filter Active
Carbon (
FY3432
)
A5 and C7 display
on the screen
alternately
and the filter
replacement alert
goes on.
Replace both
filters