Philips AC4373, Руководство пользователя

Страница: 20 / 28

20
7 Replacing the
filters
The indicator of the filter replacement
indicates the respective filters ( ,
, or )have to be replaced.
Note
•
Lifetime of the filter is based on the
volume of air purified, it may differ
from the way of using. In heavily
polluted environment, the filter
lifetime may be shorter than the
recommended time.
•
If you remove the front panel for filter
changing while the purifier is switched
on, all lights on the control panel will
be off.
•
Once the front panel is placed back
to the purifier, it starts to run as its
previous status.
•
The replaceable filters are not
washable nor vacuum cleanable.
Replace the multi-care filter, the activated
carbon filter, and the HEPA filter when the
respective indicators ( , , and ) go on.
This will last for approximately 2 weeks.
On the last day of the 2 weeks, the purifier
chimes every 30 minutes to inform you
that the filter needs to be replaced.
EN
Note
•
Insert the filters in the correct position.
•
Make sure you place the filters in the
order of HEPA filter, the activated
carbon filter, the multi-care filter, and
then pre-filter.
•
Make sure that the side with the tag is
pointing towards you.
•
Refer to the ‘How to replace filters’
video clip in the
Philips Smart Air
Purifier
APP. The video clip can be
found in the filter status section.
1
Switch off the purifier and unplug it.
2”
2
Place your fingers in the recesses of
the side panels and gently pull the
front panel towards you. Then lift the
panel off the hooks at the bottom of
the purifier.