Filter reset
You can replace filters even if there is
no filter replacement code displayed on
the screen. After replacing a filter, you
need to reset the filter lifetime counter
manually.
1
Touch
and
simultaneously for
3 seconds to enter the filter reset
mode (fig.
{
).
»
Code (
A3
) of the NanoProtect
filter Series 3 displays on the
screen.
2
Touch and hold
for 3 seconds to
force reset the filter lifetime counter
of the NanoProtect filter Series 3
(fig.
z
).
3
Code
(C7)
of the Nanoprotect filter
Active Carbon displays on the
screen after the lifetime counter of
the NanoProtect filter Series 3 has
been reset (fig.
|
).
4
Touch and hold
for 3 seconds to
force reset the filter lifetime counter
of the NanoProtect filter Active
Carbon and exit the filter reset
mode (fig.
}
).
Filter alert light
status
Action
A3 displays on
the screen
Replace
NanoProtect filter
Series 3 (
FY1410
)
C7 displays on
the screen
Replace
NanoProtect filter
Active Carbon
(
FY1413
)
A3 and C7
display on
the screen
alternately
Replace both filters
1
Turn off the air purifier and unplug
from the power socket.
2
Take out the used air filter according
to the filter alert light status
displayed on the screen (Fig.
y
).
Discard used filters.
Note
•
Do not touch the pleated filter surface,
or smell the filter as it has collected
pollutants from the air.
3
Remove all packaging material from
the new filter (Fig.
f
).
4
Place the new filters into the air
purifier (Fig.
g
).
5
Put the plug of the air purifier in the
power socket.
6
Touch and hold the
for 3 seconds
to reset the filter lifetime counter
(Fig.
z
).
7
Wash your hands after changing a
filter.
12
EN
Содержание AC1214
Страница 2: ...3s 3s 3s 3s ...
