Digital Telephone Desktop 9850
16
Configuring the device with the software
PC System requirements
Hardware requirements
•
Recommended: Pentium III, 500M Hz and 128 MB RAM, 30 MB hard disk space for
SpeechExec. 150 MB for Microsoft .NET 1.1 Framework (not required for Windows XP SP2),
1 free USB port.
Software requirements
For all operating systems listed below, we recommend that you apply the latest Service Pack
available before installing SpeechExec.
•
Windows 2000 (Service Pack 3 is required for Digital Pocket Memo support), Windows XP
(Home or Professional edition)
Software installation
Note
: A user must have administrator rights to install the program under Windows 2000 or
Windows XP. Contact your system administrator if you need help
.
The software is delivered on a CD. When you insert the CD into your CD-ROM drive,
autorun.exe
is started. Select
Install
to begin the installation. If this program does not start
automatically when you insert the CD, start setup manually by doing the following:
1. Double-click
the
My
Computer
icon on the desktop.
2. Double-click the CD-ROM drive icon; you will be shown the contents of the CD.
3. Start the program
autorun.exe
by double-clicking it and select
Install
.
Desktop 9850 driver installation
1. Connect the Desktop 9850 to the mains power supply.
2. Turn on your computer and connect the USB port of the 9850 with the USB port of the PC.
3. Press the DOWNLOAD button (
) on the Desktop 9850 to establish connection with the
PC.
The
New
Hardware
Found
message is displayed and installation will proceed automatically.
Note
: If this message does not appear, verify whether the USB port is enabled in the BIOS of
your system. See your hardware documentation for details or contact your hardware vendor.