Depart. Technical support- CM640
PROCEDURE COMPANY
RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
Service Repair Support
VY-V-640-P655
Page : 29 of 74
Langue : EN
Date : 03/01/05
8.4
W@P Test Procedure
With regard to the mobile phones only four things can prevent the W@P applications to operate properly :
•
The Mobile Phone is not W@P able
Registration problem (W@P & data/fax options should be needed depending on the operator)
•
8.4.2
•
A bad configuration (wrong W@P parameters)
•
The mobile has a deficient Radio part.
So that’s why to solve W@P problems the following process must be observed.
Ensure about the W@P capability of the mobile phone.
Interrogate the customer regarding his operator registration.
Check with the customer that all the needed parameters are stored in the phone memory
( a quick test has to be performed to check memory reliability)
Perform a functional and a radio test of the mobile phone.
The W@P Test procedure as to be performed only if the customer complains about W@P applications.
8.4.1 Functional and radio test
Before starting the W@P procedure it must be assumed that the functional test and the radio test have been done
successfully.
(Refer to chapters 8.1 & 8.2)
W@P Menu explanation (to be checked using the Operator Simcard)
When you launch Wap functions, you see this screen.
1.Home page parameter (URL):
This parameter is a string of characters (ASCII) used to identify the protocol (eg: HTTP), the location of the
server (eg: WAP.Philips.com), the port number (optional if = 80) and the access path
(eg:/glossair/glossair.htm).The end user can use the operator’s home page or set up another one in the mobile
phone. The URL can be set as follows:
PHILIPS ELECTRONICS N.V. 1999
VY-V-640-P655
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
