manualshive.com logo in svg

Philips 63059CM, Руководство по установке и эксплуатации

Поделиться
Скачать
Philips 63059CM Скачать руководство пользователя страница 15

Vision.net Ceiling Occupancy Sensor

Installation & Operation Guide

13

MANUAL CONFIGURATION

Using Programming Switches

There are two programming switches (buttons) on the Ceiling Occupancy Sensor which can be 
used to Display and Modify the Sensor’s Settings. Programming Switch 2, the "Field" Button 
(turns on the Blue LED when pressed) is used to select the Field you wish to display or 
modify. Programming Switch 1, the "Setting" Button (turns on the Green LED when pressed) 
is used to set the value of the selected Field. By using both buttons, the Sensor can be 
manually configured for most applications. 

To enter Manual Programming Mode:

Step 1. Unscrew Lens Cover on Ceiling 

Sensor to access manual 
programming buttons.

Step 2. Press and hold the Field Button for 3 

seconds. After 3 seconds the Red 
LED will turn on indicating the unit 
is in the Manual Programming 
Mode. Release the button.

To exit Manual Programming Mode:

There are three ways to exit the Programming 
Mode.

•

Keep tapping the Field Button until 
Ceiling Sensor exits Programming Mode.

•

Hold the Field Button for 3 seconds.

•

Stop tapping the buttons. The Ceiling 
Sensor will exit the Programming Mode 1 minute after the last button press.

LED Display

When in the Programming Mode, the LEDs display the following information:

•

Red LED – Always On.

•

Blue LED – Blinks 1 to 6 times to indicate the Field being displayed or set (see Field/
Setting Table on next page).

•

Green LED – Blinks 1 to 9 times to indicate the present setting of the Field (see Field/
Setting Table on next page).

Programming

Switch 1 (Setting)

GREEN

Programming

Switch 2 (Field)

BLUE

Figure 4:  Manual Programming Buttons

Содержание 63059CM





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды