Philips 63059CM, Руководство по установке и эксплуатации

Страница: 11 / 20

Vision.net Ceiling Occupancy Sensor
Installation & Operation Guide
9
Relays Select
The RLYS (Relays) Select Button is used to program which Relays are controlled by the
Occupancy Sensor (when used with Contact Relay Packs). One or more Relays can be
programmed into the Sensor. The factory default is All Relays (1-8). The Sensor can also be
used to trigger a specific button on a connected keypad. When used with a Button Station, the
Relay programmed into the Sensor will define which button on the keypad to activate.
Detected motion will trigger the button 'Press On' action. The end of motion timeout will
trigger the button "Release" action. When All Relays are selected (factory default), the
connected keypad will trigger only Button 1. Only single Relay selects are allowed when
triggering keypads.
To change the relay/button selection of the sensor:
Step 1. Enter Programming Mode (refer to page 6.)
Step 2. Press RLYS button.
Step 3. Select the button to be controlled by the sensor.
Exit programming by pressing the PGM (Program) button or continue with programming by
selecting another field.
Button 1 Relay/Button #1 * Factory Default
Button 2 Relay/Button #2 * Factory Default
Button 3 Relay/Button #3 * Factory Default
Button 4 Relay/Button #4 * Factory Default
Button 5 Relay/Button #5 * Factory Default
Button 6 Relay/Button #6 * Factory Default
Button 7 Relay/Button #7 * Factory Default
Button 8 Relay/Button #8 * Factory Default
Button 0 Factory Default * Current mode only