Philips 63059CM, Руководство по установке и эксплуатации

Страница: 14 / 20

Installation & Operation Guide
Vision.net Ceiling Occupancy Sensor
12
Test
The Test feature allows testing of the system without having to wait extended periods of time
for the loads to time out.
While in Test Mode, the timer functions at a rate of 1 second per 1 minute of decay. For
example, a 30-minute time-out period would become a 30-second time-out period. There is a
10 second minimum.
During testing, the sensor will blink RED to indicate it is in the Test Mode, BLUE when it
detects motion, and GREEN when it is timing out.
To enter Test Mode:
Step 1. Enter Programming Mode (refer to page 6.)
Step 2. Press TEST button. All sensors in Test Mode will blink red.
Step 3. Confirm all sensors, relays and switches are working properly.
Step 4. Press TEST button again to exit Test Mode.
Note: You may alternate between Test Mode and Programming Mode by simply pressing the
TEST button anytime during the process.
Display
The Display feature allows the programmer to visually and audibly verify the programmed
feature parameters.
To enter Display Mode:
Step 1. Enter Programming Mode (refer to page 6.)
Step 2. Select the field you wish to verify.
Step 3. Press DISPLAY SETTINGS button.
Step 4. Tap the button for each available setting for the chosen field. The sensor will blink
RED indicating that the setting is not programmed for the sensor, or BLUE,
indicating that the setting is programmed to the sensor.
Step 5. Press DISPLAY SETTINGS button again to exit.
Example: To see the time-out period of a sensor: Press TIME, then DISPLAY SETTINGS.
Toggle through the time selections until the sensor blinks BLUE to indicate the programmed
time-out period.