Connect to the TV
Getting started (Continued)
4
Your Philips Digital TV will allow you to enjoy digital programs
directly from your cable or off air.
Connect directly to the TV or connect via your current cable
box or Satellite Receiver box.
• Directly to the TV
(you will not be able to receive pay
channels)
1. Connect the cable TV signal or the incoming antenna signal
to the
CABLE/ANTENNA
75
Ω
x
jack at the bottom of
the TV.
2. See page 31 for details on using Autoprogram to store
channels in the TV’s memory.
• Via a cable box or Satellite box
1. Maintain the connection of the TV cable of your home into
your cable box (or satellite receiver box).
2. Connect your Cable box (or satellite receiver box) to the
back of the TV using the best connection options. See to
make audio and video connections, p. 44.
3. Select the source using the
AV
button on the remote
control.
4. Press the
OK
button to confirm your selection.
For more information, please refer to your cable box (or
satellite receiver box) manual.
Notes
:
- Broadcasters are in the middle of a transition from analog to
digital TV.This means that a given broadcaster will have two
channels on the air, one analog and one digital.
- This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
ANTENNA
75
o
CABLE
L
Pr
H
R
Pb
V
DIGITAL
AUDIO
IN
Y
Pb
Y
S-VIDEO
S-VIDEO
AV2
AV3
AV1
VIDEO
L
R
Cable box / SAT
VIDEO
AV2 :
L + R + VIDEO
ANTENNA
75
o
CABLE
OUT
IN
SIGNAL
SPLITTER
- To connect a camera, camcorder or game, see To make video
and audio connections, p. 44.
- To connect a headphone, see To make video and audio
connections, p. 44.
- To connect a USB device, see Multimedia browser, p. 41.
Overview of the side connector panel
2572.3 en 13-11-2006 13:18 Pagina 4
