First time installation (continued)
11
English
User Man
ual
After the Welcome screen you are asked to select a language of
the TV's on-screen menus.The text of the header and the info
on screen continuously change language.
1. Press the cursor up/down to highlight your language.
2. Press the
OK
button on the remote control.
3. Follow the instructions on screen to proceed.
Step 1: select your on-screen language
1. Press the green color button on your remote control to
start the television installation.
2. Select
Cable
or
Antenna
in the Installation mode and
press the green color button.
>
When
Antenna
is selected, the TV will detect antenna
signals and will search for antenna TV (NTSC and ATSC)
channels available in your local area.
>
When
Cable
is selected, the TV will detect cable
company supplied signals and will search for cable TV
(NTSC, ATSC, QAM modulated) channels available in
your area.
3. Press the green color button on your remote control to
start the Automatic channel installation.
>
All available TV channels are searched for and stored
automatically.This will take a few minutes.When the
search is complete, the menu will indicate the number of
digital and analog channels found.
4. Press the red color button when the search is completed.
Step 2: complete the initial TV installation
procedure
SELECT
PHILIPS DEVICE CONTROL
PHILIPS DEVICE CONTROL
INPUT
GUIDE
GUIDE
FORMAT
POWER
FAV
FAV
CH
VOL
MUTE
MUTE
...
.
Previous
Next
Skip
Stop
PHILIPS
Television installation
System searching: please wait..........
Digital channels found
16
Analog channels found
22
Stop
PHILIPS
Installation
This will help you to install the following
sections:
Television installation
Settings assistant
Menu language
English
Español
Français
Português
.............
Please select your
language.....
PHILIPS
using cursor up and
down
Next
Note:
if you choose to install the channels at a later
time, select Autoprogram in the TV menu, Installation,
Channels to scan available channels.
2572.3 en 13-11-2006 13:18 Pagina 11