55BDL3050Q
43
Factory reset
Reset all settings in the OSD menus of {
Picture
}, {
Screen
}, {
Audio
},
{
Configuration1
}, {
Configuration2
}, and {
Advanced option
} to the
factory preset values.
Android settings will also reset when factory reset.
Press
[ ]
or
[ ]
button to select {
Reset
}, and press
[OK]
button to
do the reset.
Factory reset
CANCEL
Reset
6.2.5. Configuration2 menu
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
OSD turn off
OSD H position
OSD V position
Information OSD
Logo
Monitor ID
Heat status
Monitor information
HDMI Version
Configuration2 reset
45
50
50
10
On
Action
24.21°C 75.57°F
Action
Action
OSD turn off
Set the period of time the OSD (on-screen display) menu stays on the
screen.
The options are: {
Off, 5 ~ 120
} seconds.
*{0ff} does not disappear automatically.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
Information OSD
Set the period of time the information OSD is displayed on the upper
right corner of the screen. The information OSD will display when input
signal is changed.
The information OSD will remain on the screen with {
Off
} selection.
The options are: {
1 ~ 60
} seconds.
Logo
Choose to enable or disable the picture of Logo when turn on your
display.
The options are:
• {Off}
• {On} (Default)
• {User}
1. If Logo set to ON, both scalar Philips logo and android animation
Philips logo will show.
2. If Log set to OFF, neither scalar Philips logo nor android animation
logo will not show.
3. If Logo set to USER, custom logo option in android is not set, then
there will be no boot logo when power on.
4. If Logo set to USER, custom logo option in android is set, there will
be only custom logo when power up.
Monitor ID
Set the ID number for controlling the display via the RS232C
connection. Each display must have a unique ID number when multiple
sets of this display are connected. Monitor ID number range is between
1 to 255.
The option are: {
Monitor group
}
Monitor ID
Monitor ID
Monitor group
1
1
• {
Monitor group
}
The options are: {
Off
} / {
1-254
}
•
{Off} – {Monitor group} are not supported.
•
{1-254} – {Monitor group} are supported. The default setting is
1.
1
2
5
6
3
4
7
8
9
10
11
12
13
14
15
16
Heat status
This function allows you to check the thermal status at any time.
Monitor information
Shows information about your display, including model number, serial
number, operating hours and software version.
Monitor information
Model name
Serial NO.
Operation hours
SW Version
XXBDL3050Q
N/A
0
FBXX.XX
HDMI Version
Set the HDMI version to 1.4 or 2.0, this setting is only valid on HDMI
input
Configuration2 reset
Reset all settings in
Configuration2
menu to the factory preset values.
