BDL4988XC/49BDL3005X
23
• {
V
Zoom
}: Expand the vertical size of image only.
Note
: Zoom, H Zoom and V Zoom are available only when the Picture
format setting is set to Custom Zoom.
See page 18 for the descriptions about
Picture format
.
HDMI input range
Color ranges of HDMI video format
• {
Auto
}: Automatic color range of HDMI video format.
• {
Limit
}: Limited range of HDMI video format.
• {
Full
}: Full range of HDMI video format.
Picture reset
Reset all your picture settings to the factory defaults.
5.1.2. Sound
Sound style
Bass
Treble
Balance
Volume
Minimum volume
Maximum volume
Surround mode
Audio out (line out)
Advanced
Sync. Volume
Sound reset
Picture
Sound
Tiling
Network
General settings
Advanced
Help
Sound style
Access predefined sound settings.
Bass
Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
Balance
Adjust to emphasize left or right audio output balance.
Volume
Adjust to increase or decrease the volume.
Minimum volume
Set the minimum volume.
Maximum volume
Set the maximum volume.
Surround mode
Set surround effect for audio performance.
Audio out (line out)
Adjust audio output volume.
Advanced
Access advanced settings to enhance your audio experience.
• {
Auto volume leveling
}: Enable the reduction of sudden volume
changes.
• {
Speaker settings
}: Turn On or Off the internal speaker.
• {
Clear sound
}: Enhance sound quality.
• {
Audio out format
}: Select the type of audio output through
the digital audio output connector. (HDMI only)
• {
Audio out delay
}: Automatically synchronize the image of this
display to the audio from a connected home theatre.
• {
Audio out offset
}: Adjust the setting for audio output delay. This
option is available if {
Audio out delay
} is switched on.
Sync. Volume
Enable or disable the Sync. Volume function. Set {On} to synchronize the
volume of internal speaker and line-out. Set {Off} to adjust the volume
of internal speaker and line-out, respectively.
Sound reset
Reset to the default setting.
Card OPS audio
Set OPS audio output format.
The options are: {
Auto
}, {
Analog
}, {
Digital
}
NOTE: When Card OPS source is selected, this item will appear on
the OSD menu.
5.1.3. Tiling
Enable
H monitors
V monitors
Position
Frame comp.
Frame comp. H
Frame comp. V
Switch on delay
RS232-Routing
Auto ID
Picture
Sound
Tiling
Network
General settings
Advanced
Help
Create a single large-screen matrix (video wall) that consists of up to
100 sets of display (
up to 10 sets in vertical side and 10 sets on the
horizontal side
).
Enable
Enable or disable the Tiling function. If {
On
} is selected, the display will
apply the settings in {
H monitors
}, {
V monitors
}, {
Position
}, and {
Frame
comp.
}.
H monitors
Set how many displays in horizontal side.
V monitors
Set how many displays in vertical side.
Position
Set the position of this display in the screen matrix.
