BDL4988XC/49BDL3005X
24
Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
1
2
3
4
H monitors
V monitors
Position
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
1
2
6
7
3
4
8
9
5
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
H monitors
V monitors
Position
Frame comp.
Turn the frame compensation function On or Off. If you select {On}, the
display will adjust the image to compensate for the width of the display
bezels in order to accurately display the image.
{
On
}
{
Off
}
Frame comp.H
Adjust the horizontal frame compensation.
Frame comp.V
Adjust the vertical frame compensation.
Switch on delay
When multiple displays are connected, adjust the power-on delay time (in
seconds) for each display to reduce the power load.
RS232-Routing
Select the control port.
• {
RS232
}: Select RS232 Control.
• {
LAN(RJ-45)
}: Select LAN control.
• {
IR
}: Select the operation mode of the remote control when
multiple displays are connected via an RS232C connection.
• {
IR Control
}: IR control of the display.
• {
Normal
}: All displays can be operated normally by the remote
control unit.
• {
Primary
}: Designate this display as the primary display for remote
control operation. Only this display can be operated by the remote
control
• {
Secondary
}: Designate this display as the primary display for
remote control operation. Only this display can be operated by the
remote control.
• {
Control Monitor-ID
}: Select the ID number for the IR control of
the display via the RS232C connection.
• {
Card OPS RS232
}: Select RS232 Control. (Only available when
OPS is started.)
Auto ID
Set up {Monitor ID} of the connected device according to {H monitors}
settings.
Example: set H monitors as 4
