Philips 42PFL5007D/30, Руководство по обслуживанию

Страница: 23 / 106

Service Modes, Error Codes, and Fault Finding EN 23 TPM9.5A LA 5.
2012-Nov-30
back to
div. table
9 CLR_TEMP_R 98 107 77 125 Red colour temperature setting
10 CLR_TEMP_G 125 85 83 127 Green colour temperature setting
11 CLR_TEMP_B 139 128 128 124 Red colour temperature setting
12 AUTO_COLOR Press OK PC: any pattern that has black and white, YPbPr: SMPTE bar (colour bar), any timing.
13 ADC_GAIN_R 74 77 78 77 Red ADC gain
14 ADC_GAIN_G 70 77 80 76 Green ADC gain
15 ADC_GAIN_B 69 80 80 81 Blue ADC gain
16 ADC_OFFSET_R 96 102 95 98 Red ADC offset
17 ADC_OFFSET_G 98 91 96 95 Green ADC offset
18 ADC_OFFSET_B 89 98 96 97 Blue ADC offset
19 E-Fuse On E-fuse mode
20 ORT_MODE Off ORT mode
21 RESET_PBS_PWD Press OK Use this to reset the Child Lock
22 V-COM Press OK V-COM
23 VIDEO_PWM_MEDIUM 128 128 128 150 VIDEO PWM Medium value
24 VIDEO_PWM_MINIMUN 220 178 178 178 VIDEO PWM Minimum value
25 VIDEO_PWM_MAXIMUN 0 0 0 0 VIDEO PWM Maximum value
26 PWM_RATIO_BEST_PICTUR
E 100 100 100 100 PWM ratio best picture
27 PWM_RATIO_STD_TOP 79 79 79 80 PWM ratio standard top
28 PWM_RATIO_STD_BOTTOM 74 74 74 70 PWM ratio standard bottom
29 PWM_RATIO_BEST_POWER 80 80 80 70 PWM ratio best power
30 VIDEO_STD_TH_HIGH 97 97 97 97 VIDEO standard threshold high
31 VIDEO_STD_TH_LOW 93 93 93 93 VIDEO standard threshold low
32 YPBPR_PHASE InValid Not available for this chassis
33 AUD_LIMITER_MODE 2 0 Three modes, 0: off, 1: adaptive mode, 2: fixed mode
34 AUD_THRESHOLD_BYTE1 0 0 Limit threshold
35 AUD_THRESHOLD_BYTE2 10 0 Limit threshold
36 AUD_THRESHOLD_BYTE3 6 16 Limit threshold
37 AUD_GAIN_LINEIN 3 3 Line-in audio gain
38 AUD_GAIN_HDMI 2 2 HDMI audio gain
39 AUD_GAIN_ATV 3 9 Analogue TV audio gain
40 AUD_GAIN_DTV 2 15 Digital TV audio gain
41 AUD_GAIN_USB 2 2 USB audio gain
42 Tuner ID 135 135 Displays and changes the Tuner ID with the left and right cursor. Not to be changed when the tuner is replaced
with the correct service part
43 ESTICKER NVM 1 0 0 0 25 ESTICKER value
44 ESTICKER NVM 2 3 3 3 15 ESTICKER value
45 ESTICKER NVM 3 6 4 4 4 ESTICKER value
46 ESTICKER NVM 4 7 6 6 27 ESTICKER value
47 ESTICKER NVM 5 8 7 7 28 ESTICKER value
48 ESTICKER NVM 6 9 8 8 29 ESTICKER value
49 ESTICKER NVM 7 2 9 9 7 ESTICKER value
50 ESTICKER NVM 8 255 2 2 9 ESTICKER value
51 ESTICKER NVM 9 255 255 255 31 ESTICKER value
52 ESTICKER NVM 10 255 255 255 21 ESTICKER value
53 ESTICKER NVM 11 255 255 255 16 ESTICKER value
54 ESTICKER NVM 12 11 11 11 17 ESTICKER value
55 ESTICKER NVM 13 14 14 14 255 ESTICKER value
56 ESTICKER NVM 14 17 15 15 255 ESTICKER value
57 ESTICKER NVM 15 18 17 17 255 ESTICKER value
58 ESTICKER NVM 16 19 18 18 255 ESTICKER value
59 ESTICKER NVM 17 20 19 19 255 ESTICKER value
60 ESTICKER NVM 18 13 20 20 255 ESTICKER value
61 ESTICKER NVM 19 255 13 13 255 ESTICKER value
62 ESTICKER NVM 20 255 255 255 255 ESTICKER value
63 ESTICKER RESET Press OK ESTICKER reset
64 CIPLUS QUERY Press OK Shows the Validity of the CI+ key and the supplier information
65 CIPLUS UPDATE Press OK Used to enter a new CI+ code into the NVM. This can only be used when no CI+ code exists in the NVM
66 AQ_TABLE_INDEX 1 2 3 6 Audio Quality index
67 LIGHT SENSOR Press OK Light sensor
68 TEST PATTERN Press OK With the “left” and “right” keys of the remote control various test patterns can be chosen
69 EDID UPDATE FROM USB Press OK Used to enter a new EDID codes into the NVM
70 EDID LOAD DEFAULT Press OK EDID LOAD
71 EDID TOR SEC 0 0 0 0 AMBLIGHT NVM INIT
72 EDID TOR TIMES 0 0 0 0 AMBLIGHT NVM INIT
73 TCON_GAMMA_UPDATE Press OK TCON gamma update
74 AUDIO DEFAULT INIT Press OK AUDIO default init
75 AMBLIGHT TEST MODE 0 AMBLIGHT TEST MODE
76 AMBLIGHT NVM INIT Press OK AMBLIGHT NVM INIT
77 AMBLIGHT Enable Disable Philips AMBLIGHT Sub brightness
78 AMBLIGHT Sub brightness -20 -20 -20 -20 AMBLIGHT Sub brightness
79 AMBLIGHT L_R 240 240 240 240 AMBLIGHT value
Item Item value
Default value
Description 32" 42" 46" 47"