Philips 42PFL3606H/12, Руководство по обслуживанию

Страница: 16 / 112

Mechanical Instructions EN 16 TPM6.1E LA 4.
2011-Jun-10
back to
div. table
4.4.9 LED Panel
Refer to Figure 4-13 for details.
1. Remove the SSB as described earlier.
2. Remove the PSU as described earlier.
3. Remove the stand as described earlier.
4. Remove the stand bracket as described earlier.
5. Remove the Power switch and mains plug as described
earlier.
6. Remove the speakers as described earlier.
7. Release the tapes from the cables of the IR/KEY board.
8. Release the clips from both the LVDS flat
foil connectors [1].
Caution: be careful, as these are very fragile cables and
connectors! Take the flat foils out of their connectors.
9. Remove the fixation screws [2] at the top, sides and bottom
of the panel that secure the LED panel with the bezel.
Remove all metal clips from their position. Be careful not to
break the clicks that secure by metal brackets to keep
those in position.
10. Lift the LED Panel from the bezel.
When defective, replace the whole unit.
Figure 4-13 LED panel removal
4.5 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See
Figure 4-1 to
Figure 4-3 .
• Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
19080_115_110402.eps
110407
2 2
2
2
2
2
2
2
1
2
2
2
2
1