•
The remote control is paired with another TV
To pair, hold the remote control close to the Philips logo (about
10cm) and press the
Red and
Blue key at the same time.
A message will appear if pairing is successful.
•
The remote control is not paired yet
To pair, hold the remote control close to the Philips logo (about
10cm) and press
OK
. A message will appear if pairing is
successful.
For retail
To pair a new — not yet paired — TV with a remote control
which is already paired with another TV, hold the remote
control close to the Philips logo (about 10cm) and press the
Red and
Blue key at the same time. A message will
appear if pairing is successful.
If the remote control is still fails to pair the TV, press
>
Setup
>
TV settings
>
General settings
>
Reinstall TV
. After the
reinstallation, try to pair again.
6.5
Batteries
The TV will notify you when the battery power of the remote
control is low.
To replace the batteries, open the battery compartment on the
keyboard side of the remote control.
1 -
Use a small coin or other small, blunt object and press the
rectangle shaped release button to open the battery lid.
2 -
Slide the blue lock open in the direction shown by the arrow
and lift the lock.
3 -
Replace the old batteries with 2 type
AA-LR6-1.5V
alkaline
batteries. Make sure the + and the - ends of the batteries line up
correctly.
4 -
Push the blue lock down and slide it back until it clicks.
5 -
Reposition the battery door and push it down until it clicks.
Remove the batteries if you are not using the remote control for
a long time.
Safely dispose of your old batteries according to the end of use
directions.
For more information, press
Keywords
and look up
End of
use
.
6.6
Cleaning
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the remote control.
26
www.devicemanuals.eu/
