English
42
IPconfiguration
In following cases, select
IP configuration
to set each setting as
necessary.
– When connection test failed with the setting of
Connection test
.
– When instructed by your Internet service provider to make specific
settings in accordance with your network environment.
3
Use ▲▼ to select
IP configuration
, then press
OK
.
4
Use ▲▼ to select a setting, then press
OK
.
Network selection
IP setting mode
Manual
Wireless network setting IP address
192.168.11.3
IP configuration
Subnet mask
255.255.255.0
Proxy configuration
Default gateway
192.168.11.1
Primary DNS
192.168.11.1
Secondary DNS
0.0.0.0
MAC address
00:12:0E:10:09:15
IP setting mode
Auto
Sets the IP setting automatically.
Manual
Sets the IP setting manually.
IP address
*
1, 3
A set of numbers which are assigned to
devices participating in a computer network.
Subnet mask
*
1, 3
A mask which is used to determine what
subnet an IP address belongs to.
Default gateway
*
1, 3
IP address of the network device (such as
router) which provides Internet access.
DNS
setting mode
Auto
Sets the DNS setting automatically.
Manual
Sets the DNS setting manually.
Primary DNS
*
2, 3
A server which handles the name and IP
address over the Internet.
Secondary DNS
*
2, 3
A server which handles the name and IP
address over the Internet.
MAC address
An address which recognizes the devices
connecting to the network. It is also called
Hardware Address.
*1
Items can be selected only when
IP setting mode
is set to
Manual
.
*2
Items can be selected only when
DNS setting mode
is set to
Manual
.
*3
Use ▲▼ or
the NUMBER buttons
to input numbers. When you use
▲▼ to input numbers, then press
OK
or input the triple digits by using
the NUMBER buttons
, the cursor moves to the next entry field. When you
use ▲▼ to input numbers, then press
OK
or input the triple digits by using
the NUMBER buttons
at the rightmost entry field, numbers will be stored
and go back to the previous menu.
Note
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number will automatically be 255.
• The manually entered number will be saved even if you change the setting to
Auto
.
• If you want to enter 1 or 2 digit number in one cell, press
OK
to move on to the next
cell.
• If the entered IP address or the default gateway or primary DNS number is same as
the default setting, IP address setting will be set to
Auto
. (The manually entered number
will be saved).
• When IP address setting is set to
Manual
, the setting of DNS setting will automatically
be
Manual
and when IP address setting is set to
Auto
, you can set either
Auto
or
Manual
for DNS setting.
Proxyconfiguration
3
Use ▲▼ to select
Proxy configuration
, then press
OK
.
4
Use ▲▼ to select a setting, then press
OK
.
Network selection
Proxy setting
Do not use
Wireless network setting
IP configuration
Proxy configuration
•
Do not use
is selected for default settings.
• If you need to change the proxy setting as instructed by your
Internet service provider to set the designated proxy address
and port, select
Use
.
Proxy setting
Do not use
Not use the proxy server.
Use
Uses the proxy server.
Proxy address
*
Selects the number or word by using
▲▼◄►, then press
OK
.
Proxy port
*
Use ▲▼ or
the NUMBER buttons
to input
numbers.
*
Items can be selected only when
Proxy setting
is set to
Use
.
Note
• The range of input numbers for the port number is between 0 and 65535.
(If you enter a number larger than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked and not be able to use depending
on your network environment.
• If the proxy address is entered with blank only, proxy server setting will be set to
Do not use
.
Connection test
Perform the following steps to test your Internet connection after you
have connected an Ethernet cable or entered network settings such as
IP address, DNS settings, etc. manually.
2
Use ▲▼ to select
Connection test
, then press
OK
.
3
Press
OK
to select
Start now
.
• Connection test will start automatically and the test result will
appear right after the connection test finishes.
Testing…
The test is in progress.
Pass
Connection test is successfully completed.
Fail
Connection test failed. Check the connection settings.
4
Press
OK
to go to the list of network status confirmation screen.
Note
• If the connection test passes, you are ready to use Net TV or network upgrade function
using the Internet without making any additional settings.
• If the connection test fails, check if the Ethernet cable is connected to this TV properly
or if you have entered all the required details for the wireless LAN connection properly.
Continued on next page.
