English
14
9
Press
OK
to finish
Settings assistant
.
Store your preferences.
Cancel
Store
•
Network updates
will appear after
Connection test
succeeds.
Use ◄► to select
Yes
, then press
OK
.
• When the initial setup is completed, the lowest memorized
channel with the confirmation message of the location setting
will be displayed on the TV screen.
Note
• If you are not receiving a signal from your cable service, contact the Cable provider.
• If you press
during AutoProgram, this setup of TV channels will be canceled.
• The initial AutoProgram function can be executed for either
Antenna
or
Cable
only
once. When you change the connection (Antenna / Cable), set
Autoprogram
again.
➠
p. 37
After an initial setup is completed...
• If you want to scan the channels automatically again.
Autoprogram
➠
p. 37
• You can add the desired cable and Analog channels
unmemorized by AutoProgram.
Weak channel installation
➠
p. 37
• If you want to change to another language.
Language
➠
p. 36
• If you want to change the country setting.
Country
➠
p. 19
• If you want to change the location setting.
Location
➠
p. 38
• If you want to change the network setting.
Network
➠
p. 40
• If you want to restore the picture setting.
Settings assistant
➠
p. 30
