frequency value to search for channels,
select
Advanced
.
Frequency step size
The TV searches for channels in steps of
8MHz
.
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of
1MHz
. Using the 1MHz steps will take more
time to search for and install channels.
Network frequency mode
If you intend to use the fast
Quick
method
in
Frequency scan
to search for channels,
select
Automatic
. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select
Manual
.
Network frequency
With the
Network frequency mode
set to
Manual
,
you can enter the network frequency value received
from your cable provider here. To enter the value,
use the number keys.
Network ID
Enter the network ID supplied by your cable
provider.
Symbol rate mode
If your cable provider did not give you a
specific
symbol rate
value to install the TV channels,
leave the
Symbol rate mode
setting on
Automatic
.
If you received a specific symbol rate value,
select
Manual
.
Symbol rate
With the
Symbol rate mode
set to
Manual
, you can
enter the symbol rate value by using the number
keys.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select
Free +
scrambled
. If you did not subscribe to pay TV
channels or services, you can select
Free
channels only
.
Automatically Search for Channels
(Home) > Settings > Install
Channels >
Antenna/cable installlation
>
Automatic channel update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
Channel Update Message
(Home) > Settings > Install
Channels >
Antenna/cable installlation
>
Channel
update message
When new channels are found or if channels are
updated or removed, a message is shown at TV start
up. To avoid this message to appear after every
channel update, you can switch it off.
Digital: Reception Test
(Home) > Settings > Install
Channels >
Antenna/cable installlation
>
Digital:
reception test
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select
Search
and press
OK
.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with
and
and change the number
with
and
. To check the frequency,
select
Search
and press
OK
.
Analogue: Manual Installation
(Home) > Settings > Install
Channels >
Antenna/cable
installlation
>
Analogue: manual installation
Analogue TV channels can be manually installed,
channel by channel.
•
System
To set up the TV system, select
System
.
Select your country or the part of the world where
you are now and press
OK
.
•
Search Channel
To find a channel, select
Search Channel
and
press
OK
. You can enter a frequency yourself to find
a channel or let the TV search for a channel.
Press
OK
, select
Search
and press
OK
to search
for a channel automatically. The found channel is
shown on screen and if the reception is poor,
press
Search
again. If you want to store the channel,
select
Done
and press
OK
.
15
Содержание 32PHS6825
Страница 57: ...Powered by TCPDF www tcpdf org 57 ...
