MPEG Artefact Reduction
(Home) > Settings > All
settings > Picture > Expert mode
settings
>
MPEG Artefact Reduction
Select
Maximum
,
Medium
,
Minimum
to have
different degress of smoothing the artefects in digital
video content.
MPEG artefacts are mostly visible as small blocks or
jagged edges in on-screen images.
Picture Format
(Home) > Settings > All
settings >
Picture > Picture format
If the picture is not filling the whole screen, if black
bars are showing on the top or bottom or at both
sides, you can adjust the picture to fill the screen
completely.
To select one of the basic settings to fill the screen…
•
Wide screen
– automatically zooms in the picture
to 16:9 full screen. Picture content aspect ratio may
change.
•
Fill screen
– automatically enlarges the picture to
fill the screen. Picture distortion is minimal, subtitles
remain visible. Not suitable for PC input. Some
extreme picture formats can still show black bars.
Picture content aspect ratio may change.
•
Fit to screen
– automatically zooms in the picture
to fill the screen without distortion. Black bars may be
visible. Not supported for PC input.
•
Original
– automatically zooms in the picture to fit
the screen with original aspect ratio. No content lost
visible.
(Home) > Settings > All
settings >
Picture
>
Picture format
>
Advanced
To format the picture manually…
•
Shift
– select on the arrows to shift the picture. You
can only shift the picture when it is zoomed in.
•
Zoom
– select on the arrows to zoom in.
•
Stretch
– select on the arrows to stretch the
picture vertically or horizontally.
•
Undo
– select to return to the picture format you
started with.
Quick Picture Settings
(Home) > Settings > All
settings >
Picture >
Quick picture settings
• During the first installation, you did some picture
settings in a few easy steps. You can redo these steps
with
Quick picture settings
menu.
• Select the picture setting you prefer and go to the
next setting.
• To do these steps, make sure the TV can tune to a
TV channel or can show a programme from a
connected device.
Sound Settings
TV Placement
(Home) > Settings > All settings >
Sound
>
TV
placement
Select
On a TV stand
or
On the wall
to have best
sound reproduction according to the setting.
Advanced sound settings
Volume Control
Auto volume
(Home) > Settings > All
settings >
Sound
>
Advanced
>
Auto volume
Select
On
to automatically level out sudden volume
differences. Typically when you are switching
channels. Select
Night mode
for a more
comfortable quiet listening experience.
Delta volume
(Home) > Settings > All
settings >
Sound
>
Advanced
>
Delta volume
Press the arrows
(up) or
(down) to adjust the
delta value for TV speaker volume.
* Note: Delta volume is available when the input
source is set to HDMI or Analogue sources and the
Audio out is set to
TV speakers
or
HDMI sound
system
.
Audio Out Settings
(Home) > Settings > All
settings >
Sound
>
Advanced
>
Audio out
Set the TV to play the sound on TV or on the
connected audio system.
You can select where you want to hear the TV sound
and how you want to control it.
• If you select
TV Speakers off
, you permanently
switch off the TV speakers.
• If you select
TV Speakers
, the TV speakers are
always on. All the sound related settings are
applicable to this mode.
• If you select
Headphones
, the sound will be played
through headphones.
• If you select
TV Sp Headphones
, the sound
31
Содержание 32PHS6825
Страница 57: ...Powered by TCPDF www tcpdf org 57 ...
