41
ENGLISH
Connections
7.4.3
Naming your devices
Name the connected devices for easy selection and
best signal handling.
Assign the type of device (DVD, VCR, Game ...) to
the connector you use for that device.
‡
Press
Menu
on the remote control and select
TV menu > Installation > Connections >
EXT1
.
®
Press navigation key right to enter the list.
Ò
Press navigation key up or down to select the
type of device.
†
Press
Menu
to quit the menu.
7.4.4
Decoder channels
Decoders that decode an antenna channel are
connected to
EXT1
or
EXT2
(scar t).
You have to assign the TV channel as a channel to
be decoded. Then assign the connection where the
decoder is connected.
‡
Press
Menu
on the remote control and select
TV menu > Installation > Decoder >
Channel
.
®
Press navigation key right to enter the list.
Ò
Press navigation key up or down to select the
channel to decode.
†
Press navigation key left and go back to select
Status
.
º
Press navigation key up or down to select the
connector used by the decoder.
◊
Press
Menu
to quit the menu.
7.5
Preparing for digital
services
Scrambled digital TV channels can be decoded with
a Conditional Access Module (CAM) and a Smar t
card provided by a digital TV service operator. The
CAM may enable several services depending on the
operator you choose (e.g. Pay TV).
Contact your digital TV service operator for more
information and terms.
7.5.1
Insert a Conditional Access Module -
CAM
)
Warning
Switch off your TV before inser ting a CAM.
Look on the CAM for the correct inser ting
direction. Inser ting the module incorrectly may
damage the CAM and your TV.
‡
Gently inser t the CAM into the
Common
Interface
slot at the back of your TV as far as it
will go.
®
Leave the CAM in the Common Interface slot
permanently.
It may take a few minutes before a CAM is
activated. Removing the CAM will deactivate the
digital TV service.
7.5.2
Common interface menu
From this menu you access the CAM service you
have installed. The applications and their function,
the content and the messages on screen come
from the CAM service provider.
‡
Press
Menu
on the remote control and select
TV menu > Features >
Common interface
.
This menu option is available when a CAM is
inser ted and has made contact with the provider.
COMMON INTERFACE
COMMON INTERFACE
Connections
EXT 1
None
DVD
Blu-ray
HDD/DVDR
HD rec.
Game
VCR
...
EXT 1
EXT 2
EXT 3
HDMI 1
HDMI 2
HDMI 3
Side
...
2690.1 en 18-09-2007 16:50 Pagina 41