Analogue: manual installation
This gives you the possibility to manually
install (tuning-in channel by channel) analogue
channels. Manual installation will not find nor
store any DVB-T (digital) channels.
Select
Analogue: manual installation
and press the
π
key.
1
Note
When on a frequency where a DVB signal is
broadcasted, the tuner will try to decode an
analogue TV channel, and hence will not show
video.
Languages
Country
Time zone
Channels
Preferences
Connections
Decoder
.............
Info
TV menu
Installation
Channels
Autom. installation
Installation update
Digital: test recept..
Analogue: manual..
Rearrange
Select
System
.
Select your country or part of the world
where you are now located.
Select
Search
and press the
π
key.
Select the red or green colour key to
proceed.
Tip
If you know the frequency, enter the 3 digits
of the frequency with the digit keys 0 to 9 (For
example, 049).
Press the
p
key to store the channel found
or to search for another channel.
Select
Fine tune
and press the
π
key.
Fine tuning can be useful when the
frequency has shifted a bit or when
interference of another frequency occurs.
Adjust the frequency with the
o
or
œ
key
in case of poor reception of the channel
found.
2
3
4
5
6
7
8
9
Select
Store current channel
if you want
to store the (fine tuned) frequency under
the current channel number.
Press the
π
key and confirm with the
OK
key.
Select
Store as new channel
if you want
to store the (fine tuned) frequency under a
new channel number.
Press the
π
key and confirm with the
OK
key.
Use the rearrange menu to rename or
reshuffle the channels. See next page.
