47
ENGLISH
E
Software Id:
TL32E-234
Loading
Done
Validating
Done
Programming
Software Upgrade Application
Upgrade busy...
Switch on your TV with the power key
B
at the side of the TV.
At startup the TV will scan the USB portable
memory until it finds the update content.
The TV will automatically go to the upgrade
mode. After a few seconds it will display the
status of the upgrade procedure.
Warning:
• you are not allowed to remove the USB
portable memory during the software
upgrade procedure;
• in case of a power drop during the upgrade
procedure, don’t remove the USB portable
memory from the TV. The TV will continue
the upgrade as soon as the power comes
back;
• if you try to upgrade to a software
version lower than the current version, a
confirmation will be asked. Downgrading to
older software should only be done in case of
real necessity;
• if an error occurs during the upgrade you
should retry the procedure or contact your
dealer;
• the automatic software upgrade procedure
will only start if the version on the USB
portable memory is different from the one in
the TV.
When the software upgrade was successful,
remove the USB portable memory and
restart your TV with the power switch
B
at the side of the TV.
Your TV will start up with the new
software.
Note
Once the upgrade is finished use your PC
to remove the TV software from your USB
portable memory.
12.2 Manual software upgrade procedure
For a manual software upgrade copy the
“autorun.upg” file in a directory called
“Upgrades” located in the root of the USB
portable memory. You can rename the file if
you like but keep the .upg extension.
3
4
5
Insert the portable memory that contains
the downloaded software upgrade.
Select
Software Upgrade
in the
Installation menu. Go to Local upgrades.
The TV will list all compatible software
available on the USB portable memory
and display the data for each selected
upgrade
version.
1
2
Software upgrade
Current softw. info
Local upgrades
Announcement
Info
TV menu
Installation
Languages
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade