5-1
A17FYUH_EA
ELECTRICAL ADJUSTMENT INSTRUCTIONS
[32HFL5763D/F7]
General Note: “CBA” is abbreviation for
“Circuit Board Assembly.”
Note:
Electrical adjustments are required after
replacing circuit components and certain
mechanical parts. It is important to perform
these adjustments only after all repairs and
replacements have been completed.
Also, do not attempt these adjustments unless
the proper equipment is available.
Test Equipment Required
1. Remote control unit
2. Color Analyzer,
CA-310 (KONICA MINOLTA Luminance meter) or
measuring instrument as good as CA-310.
How to set up the service mode
How to set up the service mode with
Guest Remote Control Unit
1. Turn the power on.
2. Press [0], [6], [2], [5], [9], [6] and [INFO] buttons on
the remote control unit in this order.
3. Select “Quality” - “BE Factory Mode” and press the
[OK] button. The following screen appears.
How to set up the service mode with Set
Up Remote Control Unit (optional)
1. Turn the power on.
2. Press [0], [6], [2], [5], [9], [6] and [RECALL/INFO]
buttons on the set up remote control unit in this
order.
3. Select “Quality” - “BE Factory Mode” and press the
[OK] button. The following screen appears.
Code:
Pic code:
Option code:
MIPS:
Press "POWER" key to exit.
*******-**-**-****-**
**********-***-*-**
***-***-***-***
Push 0 key
Safety:
Safety_Non
Total Watch Time:
Lightsensor:
*****
****
"*" differs depending on the models.
Code:
Pic code:
Option code:
MIPS:
Press "POWER" key to exit.
*******-**-**-****-**
**********-***-*-**
***-***-***-***
Push 0 key
Safety:
Safety_Non
Total Watch Time:
Lightsensor:
*****
****
"*" differs depending on the models.
